Larson Electronics’
magnalight.com
announced the addition of the EPL-24-2L-LED-LV low voltage explosion
proof LED light. Designed to operate off of 12 or 24 volts DC or AC,
the 30 watt LED light carries a UL 844 Class 1 Division 1 and Class 2
Division 1 hazardous location rating as well as a separate paint spray
booth certification. Featuring a T6 temperature rating, the
EPL-24-2L-LED is applicable to most any hazardous location area and a
range of accessories including mesh guards, overspray covers, carts and
safety cable kits aid the operator in making the light work for their
application.
The new Magnalight EPL-24-LED-LV low voltage
explosion proof LED light is designed to last at least 50,000 hours
operating on 12 or 24 volts DC or AC. With specially designed LED tubes
with board integrated drivers, this hazardous location light fixture
does not have separate ballast creating minimal maintenance. Designed
for long life, the Class 1 Division 1 LED light offers a small 2 foot, 2
lamp form factor and operates natively off of low voltage, including
battery banks, small generators, solar panels and other off grid power
sources without the need for additional power supplies or transformers.
With aT6 temperature rating and a separate paint spray boot
certification, the low profile EPL-24-2L-LED-LV explosion proof LED
light is application for most any hazardous location area application.
Drawing less than 3 amps on 12 volts, a single deep cycle 80 amp hour
rated battery could operate this LED light for more than 25 hours. The
EPL-24-2L-LED-LV explosion proof LED light is available with a surface
or pendant mount mounting configuration. Emergency ballast
configurations are also available.
“There is a growing
demand for remote area explosion proof LED lighting for small, vibratory
areas,” said Rob Bresnahan with Larson Electronics’
magnalight.com;
“This 2 foot 2 lamp, 30 watt LED light operates on low voltage and
meets that need for operators looking for off grid LED lighting for
hazardous location areas. Since the areas are remote, the operators
want a guarantee that the light will be operational during occasional
visits to the remote area. Our LEDs offer long life, extreme
temperature resistance and respond well under high vibration. Thus,
this UL listed Class 1 Division 1, Class 2 Division 1 LED light is a
good fit for a variety of high reliability remote oriented
applications. We have seen a lot of uptake on our 120/277 VAC 2 foot 2
lamp EPL-24-2L-LED explosion proof light for small area, standard
voltage applications. So we designed a low voltage of our LED bulb with
board integrated drivers for the EPL-24-2L-LED-LV for 12/24 Volt
applications.
Larson Electronics’
magnalight.com
continues to develop and add new LED explosion proof lighting for
hazardous location areas. The entire range of Class 1 Division 1 and
Class 2 Division 1 LED lighting includes LED flashlight, headlights,
surface mount linear lights, cart based paint spray booth lights and
portable pedestal mount LED lighting.
