Larson Electronics’ Magnalight EPL-PM-1x30LED-TP1-100 tripod mounted
explosion proof LED light gives operators an easily deployable source of
powerful light that can be quickly setup and adjusted to effectively
illuminate hazardous work areas, then easily stowed and transported
between uses. This led fixture's light weight, easy deployment, high
power and good color rendering make it an ideal scene lighting choice
for first responders and emergency services.
The
http://www.magnalight.com/pc-48449-154-explosion-proof-led-light--30-watt-led--tripod-mount--100-cord--hazlo-plug.aspx
[EPL-PM-1x30LED-TP1-100 explosion proof LED light __title__
EPL-PM-1x30LED-TP1-100 explosion proof LED light] is rated Class 1
Division 1 and produces more light than a typical 300 watt incandescent
lamp while drawing only 30 watts and a tenth of the amps. The light
created by this unit has a 5500 Kelvin color temperature which is
bright white compared to the yellowish light created by typical
incandescent or halogen lamps, producing more effective color rendering
and object contrast. The enhanced color rendering and contrast produced
by this lamp’s light output will be appreciated by operators whose jobs
include detail oriented close work since fine details and colors will be
rendered more accurately. The LED lamp runs at approximately 55 degrees
Fahrenheit, considerably cooler than the 198 degree average of a 300
watt incandescent, resulting in an easier to handle unit and less heat
in a confined workspace. The
http://www.magnalight.com/c-189-light-towers.aspx
[non sparking collapsible tripod __title__ non sparking collapsible
tripod] weighs only 4 pounds and can be extended to five feet and
collapsed to 3 feet. The tripod is easily detached from the light,
aiding in deployment, storage and transport and allows operators to
quickly and securely deploy and elevate the lamp, increasing coverage of
the work area. The EPL-PM-1x30LED-TP1-100 is waterproof, constructed of
thick copper free aluminum alloy, and rated for use in wet and marine
environments. The
http://www.magnalight.com/c-140-led-lights.aspx
[Par38 LED lamp __title__ Par38 LED lamp] in this unit provides 3,800
square feet of coverage and is highly resistant to damage from shocks or
impacts, greatly reducing the chances of damage should the tower be
knocked over, unlike incandescent lamps which may break or shatter. The
LED lamp is rated at 50,000 hours of life, providing up to ten years of
regular service. This lamp is available in 120 volt 50/60 hz, 220/240
volt 50/60 hz, and 12 volt DC or 24 volt DC versions. 12VDC or 24VDC
versions have no transformer and run directly off of DC current making
them ideal for mobile applications such as first responder and
emergency services.
“Magnalight’s new explosion LED light
with tripod is a multi-voltage, lightweight explosion proof LED light
that is ideal for work crews looking for portable hazardous location
lighting,” said Rob Bresnahan with Larson Electronics. “We see a lot of
demand from gas companies, in particular, that need a bright, white
explosion proof light that they can move around easily. The
EPL-PM-1x30LED-TP1-100 is ideal for this application not only because
the LED light can be separate from the tripod and used as a pedestal
mount explosion proof light, but also because it only draws .25 amps on
120 volts and 2.5 amps on 12 volts. We can configure it either way
without a transformer, so companies using an inverter on the utility
vehicles can plug it in directly to the inverter and work trucks
equipped only with battery and alternator power can use the low voltage
version. When you are dealing with explosion proof lighting, you are not
talking about real lightweight fixtures or mounts, but I think we have
found a way to give operators the best of both worlds while maintaining a
Class 1 Division 1 rating. Finally, unlike incandescent version of the
explosion proof tripod mount lights, operators don’t have to worry
about burning themselves or waiting for the lights to cool down before
storing them.”
